Page 17 - Metal Plus Interactive Catalog 2022
P. 17
S-5 PRODUCTS
Product PCs/BOX 1 - 11 12 - 47 48+
Punched Crossmember 12 $23.98 $23.49 $22.75
Punched ColorGard is slotted every 4” (10.2 cm) on center for seams that are spaced accordingly, i.e.
®
®
divisible by 4” (10.2cm). The slotted configuration works well with S-5! clamps.
Product PCs/BOX 1 - 11 12 - 47 48+
Unpunched Crossmember* 12 $20.98 $20.59 $19.95
Unpunched ColorGard is the most versatile and easy to install, when used with the S-5! VersaClip™.
®
®
Unpunched does not need holes, as the VersaClip™ accommodates any seam spacing. The unpunched
configuration works well with VersaBracket™. Unpunched is the right choice when the roof is laid out
with untrue seam width or when the seam width is not divisible by 4. If in doubt, use unpunched.
*Must purchase VersaClips for the clamps to attach to un-punched Colorgard
Product PCs/BOX 1 - 99 100-399 400+
VersaClip 100 $1.49 $1.35 $1.25
Available for purchase separately, VersaClip™ makes installation easy, as it simply slides on the
ColorGard crossmember. It can be used with all S-5! clamps (one per clamp), and is optional with
®
®
CorruBracket™. VersaClip™ is not needed with VersaBracket™. VersaClip™ is also handy when
®
installing ColorGard askew, such as is required in the valleys between intersecting rooflines.
Product PCs/BOX 1 - 54 55 - 164 165+
SnoClip II 55 $2.39 $2.25 $2.19
SnoClip II™ is an aluminum add-on that helps retard the migration of snow and ice beneath the
®
ColorGard . Required on 2” or higher seams. Fits 1” to 1 3/4” seams. See Chart Below!
Product PCs/BOX 1 - 34 35 - 104 105+
SnoClip III 35 $2.99 $2.82 $2.74
SnoClip III™ is an aluminum add-on that helps retard the migration of snow and ice beneath the
ColorGard . Required on 2” or higher seams. Fits 1 3/4” to 3” seams. See Chart Below!
®
Product PCs/BOX 1 - 54 55 - 164 165+
SnapClip II 55 $4.29 $3.69 $3.49
Performs the same function as SnoClip, but has two additional features. SnapClip may be retrofitted
later to an existing assembly. It also screw-fastens to the crossmember, preventing it’s lateral migration.
Available in two sizes to accommodate various seam height dimensions. See Chart Below!
Product PCs/BOX 1 - 34 35 - 104 105+
SnapClip III 35 $4.05 $3.89 $3.79
Performs the same function as SnoClip, but has two additional features. SnapClip may be retrofitted
later to an existing assembly. It also screw-fastens to the crossmember, preventing it’s lateral migration.
Available in two sizes to accommodate various seam height dimensions. See Chart Below!
860-379-1327 I 17 I metalplusllc.com
