Page 20 - Metal Plus Interactive Catalog 2022

S-5 PRODUCTS

X-Gard ™ When snow accumulations begin to melt, the result can be catastrophic
as the blanket of snow avalanches off the roof, dumping tons of snow
onto anything in its path, damaging landscape, gutters, adjacent roofs,
vehicles, and causing injury or even death to passers-by. | X-Gard is the newest snow retention
®
solution from S-5! and can be designed as a one- or two-pipe system spanning up to 48”.
No other pipe snow retention system on the market has proven stronger than X-Gard.
X-Gard is the newest snow retention solution from S-5! and
The innovative double-clamp design allows X-Gard to provide unprecedented holding strength ™ ®
can be designed as a one- or two-pipe system spanning up to 48".
when attached with S-5!’s standard clamps.
The employment of two clamps with each X-Gard Offers Versatility In Snow Retention
™
bracket and the unique shape
of the NEX 2.0 pipe enables a
®
properly installed X-Gard X-Gard™ can be purchased as a one- or two-pipe system, using standard S-5! clamps, depending on project specifics
system to provide a reliable including pitch and snow load.
X-Gard 2.0
snow retention solution in a The single- and double-pipe options can also be paired with a locally-purchased round pipe, or, for superior holding
strength, X-Gard can be paired with the patented NEX® 2.0.
wide variety of situations. NEX® 2.0 is a product of Zilla®.
X-Gard is mechanically attached
with patented round-point set-
screws, gripping the seam securely
without penetration and without damage X-Gard ™ Components
X-Gard Components
™
to the panel’s protective finishes.
This new snow retention solution can be X-Gard 1.0 & 2.0 X-Gard 1.0
X-Gard 1.0 & 2.0
easily retrofitted to existing roofs or incor- S-5!® X-Gard ™ S-5!® X-Gard ™
porated into new construction design. It
can be installed any time during the year on
almost any metal roof profile.
Coming
X-Gard 2.0
X-Gard 1.0 Soon!
Lasting Quality
X-Gard Offers Versatility In Snow Retention
1-Pipe System Using NEX ® 2.0
2-Pipe System Using NEX ® 2.0
1.50"
1.50"
X-Gard Bracket 1.0 & 2.0
X-Gard Bracket 1.0 & 2.0
(38.10 mm)
(38.10 mm)
The X-Gard™ brackets, as well as the attachment clamps, are
The X-Gard™ Calculator!
1.50"
1.50"
(38.10 mm)
precision-machined, high tensile, aircraft quality aluminum, not cast 2.06"
2.06"
(38.10 mm)
(52.32 mm)
(52.32 mm)
X-Gard can be purchased as a one- or two-pipe system, using standard S-5! clamps, depending on project specifics
or plastic. All related hardware is non-ferrous stainless steel for lasting
2.44"
2.44"
(61.98 mm)
2.44"
2.44"
(61.98 mm)
Project design assistance is available
performance.
(61.98 mm)
(61.98 mm)
1.50"
including pitch and snow load. The single- and double-pipe options can also be paired with a locally-purchased round pipe,
1.50"
(38.10 mm)
2.06"
(38.10 mm)
2.06"
for the X-Gard snow retention
5.75"
5.75"
(52.32 mm)
(52.32 mm)
(146.05 mm)
(146.05 mm)
® systems.
As is also true of the S-5! ColorGard® and SnoRail™/SnoFence™ snow
®
or, for superior holding strength, X-Gard can be paired with the patented NEX 2.0. NEX 2.0 is a product of Zilla . It is critical to design a solution that takes into
®
retention systems, pound-for-pound, X-Gard provides better holding
5.31"
5.31"
strength than individual cleats.
2.06"
2.06"
(134.87 mm)
(134.87 mm)
(52.32 mm)
(52.32 mm)
Components
account the effects of gravity on a snow-
S-5!® X-Gard ™ ™ S-5!® X-Gard X-Gard Components 888-825-3432 | www.S-5.com 888-825-3432 | www.S-5.com (50.80 mm) ® ® 8.00' (2.44 m) (61.98 mm) NEX ® Splice covered roof. The tested holding strength
11.00"
11.00"
2.44"
2.44"
X-Gard Components
™
(279.40 mm)
(279.40 mm)
X-Gard is compatible with most common metal roofing materials.
(61.98 mm)
™
Please visit www.S-5.com for more information including CAD details,
of X-Gard must be checked and proven
X-Gard 1.0 & 2.0
metallurgical compatibilities and specifications.
against the actual “in-service” gravity loads
X-Gard 1.0 & 2.0
NEX Pipe Pipe
NEX Splice
NEX
Endcap
®
of the roof. This important step in application
S-5! clamps have been tested for load-to-failure results on most major
8.00' (2.44 m)
engineering should not be omitted for any
16.00' (4.88 m)
metal roof brands and profiles. The independent lab test data found at
16.00' (4.88 m)
20.00' (6.10 m)
snow retention product.
20.00' (6.10 m)
X-Gard 1.0
X-Gard 2.0
www.S-5.com can be used for load-critical designs and applications.
2-Pipe System Using 1.9" Round Pipe (Supplied by third-party)
1-Pipe System Using 1.9" Round Pipe (Supplied by third-party)
Consult with your distributor or use our online
2.00"
2.00"
calculator at www.S-5.com to help quickly
(50.80 mm)
will help you “tailor” the X-Gard system on
Wall Thickness
0.08"
0.08"
a project-specific basis, allowing for all the
(2.03 mm)
(2.03 mm)
variables involved—and even provide a
printout of the calculations and a material
X-Gard Bracket 1.0 & 2.0 1.50" Wall Thickness Comes with Nex pipe and easily design each job. The calculator
(38.10 mm)
1.50"
X-Gard Finish Options
X-Gard Bracket 1.0 & 2.0 (38.10 mm) ™ requirement list.
X-Gard Finish Options
1.50"
™
(38.10 mm) 2.06" S-5!® S-5!® Warning! Please use this product responsibly! Distr Distributed by
1.50"
W
o
onsibly!
t r
esp
duc
ibut
ed b
y
arning! Please use this pr
(38.10 mm) (52.32 mm)
2.06"
d
U.
r
o
f
S
a
.
t
n
d
y
V
ul
i
a
t
e
n
m
.
ts
p
l
ig
i
e
e
p
i
t
s
n
b
r
ww
e
.
w
a
t
t
r
i
a
p
e
m
o
c
r
o
f
.
-
s
S
c
t
5
t
h
e
b
e
e
e
t
c
s
t
o
w
(52.32 mm) 2.44" Produ Products are protected by multiple U.S. and foreign patents. Visit the website at www.S-5.com for
w
s
i
n
k
e
ar
l
o
l
d
d
u
s
m
d
e
sho
h
h
a
t
t
m
,
x
ng
m
e
r
u
i
F
c
s
.
r
g
o
s
m
s
r
t
e
a
i
t
io
p
d
a
t
a
n
o
e
n
comp
n
t
a
s
n
t
rm
n
l
e
r
o
f
e
t
2.44" (61.98 mm) complete information on patents and trademarks. For maximum holding strength, setscrews should The X-Gard Calculator was developed
2.44"
s
.
s
on
p
i
s
n
on
r
s
s
e
ho
e
e
s
i
n
n
a
c
s
n
d
t
d
t
e
w
r
e
e
e
a
e
s
i
C
o
l
p
r
s
e
t
m
-
l
d
e
a
m
c
s
l
e
e
t
t
h
ria
a
be ten
b
s
u
e
m
a
m
d
o
(61.98 mm) 1.50" (61.98 mm) be tensioned and re-tensioned as the seam material compresses. Clamp setscrew tension should be
2.44"
n
h
e
e
e
2.06" (61.98 mm) (38.10 mm) and b e and between 130 and 150 inch pounds for all other metals and thinner gauges of steel. Consult the S-5! using groundbreaking technology and is
d
e
a
r
n
e
g
C
a
t
d
5
l
f
s
o
1
0
s
3
l
l
uge
!
t
o
.
o
s
f
a
n
s
i
d
ul
p
t
e
h
o
n
t
l
s
a
t
h
t
c
t
a
h
n
n
u
5
w
n
m
1
r
o
e
r
-
n
0
i
e
S
1.50"
e a
website at www.S-5.com for published data regarding holding strength.
i
t
(52.32 mm) (38.10 mm) webs5.75" t ww w . S - 5 . c o m f o r p u b li sh e d d a t a r e g a r d i n g h o l d i n g s t r e n g t h . the first in the world of its kind utilized for
2.06"
(146.05 mm)
(52.32 mm) Copyr 5.75"ght 2015, Metal Roof Innovations, Ltd. S-5! products are patent protected. ight 2015, Metal Roof Innovations, Ltd. S-5! products are patent protected. X-Gard snow retention system is
Copyri
(146.05 mm)
e
r
S-5! ag g S-5! aggressively protects its patents, trademarks, and copyrights. Version 040317. designed to preserve the coveted
ss
i
h
s
t
,
r
i
g
s
e
r
n
V
t
.
n
t
k
m
e
r
a
,
s
a
y
ad
r
p
c
d
o
t
.
e
c
i
1
s
7
l
y
v
e
o
t
p
r
3
i
o
n
a
s
e
t
0

s
4
0
t
p
snow retention. Just provide the calculator
888-825-3432 | www.S-5.com 888-825-3432 | www.S-5.com (50.80 mm) ® ® 16.00' (4.88 m) THE X-GARD HAS MANY COMPONENTS, PLEASE CALL US AND 1. Printable/downloadable project specs
with project-specific information, and it will
5.31"
2.06"
(134.87 mm)
aesthetics of the metal roof. Based
(52.32 mm)
5.31"
immediately produce:
2.06"
(134.87 mm)
(52.32 mm)
11.00"
2.44"
(279.40 mm)
(61.98 mm)
11.00"
2.44"
upon project needs, X-Gard can be
(279.40 mm)
(61.98 mm)
painted, powder coated, or anodized
2. System configuration options
NEX Splice
NEX Pipe
®
NEX Pipe
NEX Splice
®
as chosen by the customer.
Inquire with your distribution partner for cost
estimates for select configurations.
8.00' (2.44 m)
8.00' (2.44 m)
20.00' (6.10 m)
16.00' (4.88 m)
20.00' (6.10 m)
Once designed, X-Gard is easy to install,
X-Gard snow retention system is designed to preserve the coveted
requiring tools that are common to the trade.

TM
aesthetics of the metal roof. Based upon project needs, X-Gard can be
2.00"
Because S-5! X-Gard uses mechanical
®
2.00"
painted, powder coated, or anodized as chosen by the customer.
(50.80 mm)
WE WILL DESIGN THE PROPER LAYOUT FOR YOUR ROOFING PROJECT.
can be done any time of year, with no
Wall Thickness
0.08"
Wall Thickness
cleaning, no priming, no cure times, and no
(2.03 mm)
0.08"
(2.03 mm)
callbacks!
860-379-1327 I 20 I metalplusllc.com attachment rather than adhesives, installation
S-5!® Warning! Please use this product responsibly! Distributed by
S-5!® Warning! Please use this product responsibly! www.S-5.com for
Products are protected by multiple U.S. and foreign patents. Visit the website at Distributed by
complete information on patents and trademarks. For maximum holding strength, setscrews should
Products are protected by multiple U.S. and foreign patents. Visit the website at www.S-5.com for
be tensioned and re-tensioned as the seam material compresses. Clamp setscrew tension should be
complete information on patents and trademarks. For maximum holding strength, setscrews should
be tensioned and re-tensioned as the seam material compresses. Clamp setscrew tension should be
and between 130 and 150 inch pounds for all other metals and thinner gauges of steel. Consult the S-5!
website at www.S-5.com for published data regarding holding strength.
and between 130 and 150 inch pounds for all other metals and thinner gauges of steel. Consult the S-5!
website at www.S-5.com for published data regarding holding strength.
Copyright 2015, Metal Roof Innovations, Ltd. S-5! products are patent protected.
S-5! aggressively protects its patents, trademarks, and copyrights. Version 040317.
Copyright 2015, Metal Roof Innovations, Ltd. S-5! products are patent protected.
S-5! aggressively protects its patents, trademarks, and copyrights. Version 040317.