Description
What do I do if I am having trouble getting the tool to drive itself forward?
If the roof is wet, the tools will not drive consistently. You will need to dry the roof before seaming the panels.
Other typical issues with the seamer are often related to the seaming pressure adjustment to little pressure, will result in the tool failing to feed while too much seaming pressure will lead to deformed or crushed finished seams.
Please see the: SL18705 FSXS2 Troubleshooting Guide
What should I look at if the drive wheels wore out after I only used the seamer a short time?
Verify seaming pressure knobs are adjusted properly to obtain the desired finished seam.
Over tightening these adjustment knobs can result in unnecessary contact forces on the drive wheels resulting in premature wear.
Premature drive wheel failures are often related to attempting to seam panels in the incorrect direction. The drive wheels need to ride along the vertical leg of the panel and the form wheels need to be positioned to close the open seam.
We recommend using factory original replacement drive wheels.
Will the FSXS or FSXS2 seam panels with pre-applied sealant?
Yes, the FSXS and FSXS2 will seam panels that match the panel profile shown in the instructions if sealant has been pre-applied by the manufacturer.
Reviews
There are no reviews yet.