S-5-H90 MINI
$3.89 – $3.49
M8 Bolt NOT Included, Click Here to order!
See also S-5-H90 for Snow Retention
The S-5-H90 (“H” for Horizontal seam) is designed for standing seam panels with horizontal, single-folded seams.
For horizontal seam dimensions greater than 0.65” (16.5 mm), the S-5-H90 offers you a secure and cost-effective utility mounting attachment solution. The setscrews are top-down oriented. For horizontal (or “angle seams”) of .5” (13mm) or less, see the S-5-S.
The S-5-H90 fits all standing seams that the S-5-U fits horizontally and fits fully seamed profiles the S-5-H fits vertically – but is more cost-effective than either.
The S-5-H90 Mini clamp is a more economical solution for lighter-duty attachments where Herculean holding strength is not required.
Does the S-5-H90 Fit Your Roof Profile?
All standard and Mini clamps undergo rigorous load testing. Negative load normal-to-seam testing (pull-up) is performed on all Mini clamps, and parallel-to-seam testing (drag load) is performed on all standard clamps.
PCS / BOX | 50 |
1 – 49 | $3.79 |
50 – 199 | $3.59 |
200+ | $3.29 |
Pricing subject to change at will.
- Designed for standing seam panels with horizontal, single-folded seams
- Secure and cost-effective solution for horizontal seam dimensions ≥ 0.65” (16.5 mm)
- Fits all standing seams the S-5-U fits horizontally, and fits fully seamed profiles the S-5-H fits vertically - but is more cost-effective than either.
- One T-30 Torx round-point setscrew - side installation - (Torx bit tip provided)
- No M8 bolt included
Additional information
Weight | 0.26 lbs |
---|---|
Dimensions | 2.25 × 2.25 × 2.25 in |
Flanged Bolts | S-5 Clamp WITHOUT Bolt, M8 1.25 X 16mm (+$0.28), M8 1.25 X 20mm (+$0.35), M8 1.25 X 40mm (+$0.45) |