$3.59 – $3.15
The S-5-S (“S” stands for snap-lock) is a non-penetrating, standing seam metal roof (SSMR) clamp. The S is designed for most popular vertical snap-together profiles — typically with vertical dimensions of 1.5” (38 mm) and 1.75” (44 mm). The S is also the perfect solution for traditional, single-fold (angle-seam) horizontal profiles of 1” (25 mm) and 1.5” (38 mm) seam height dimensions and all similar seam types.
The S Mini clamp is a more economical solution for lighter duty attachments where Herculean holding strength is not required.
Choose the S (or its Mini) to mount walkways, snow guards, solar panels and other mechanical equipment to snap-lock and some single-fold metal roof profiles. Although the S-5-U will work on these profiles, the S is a better fit and lower-cost solution.
The S-5-S Mini is a medium-duty, non-penetrating seam clamp. It is a bit shorter than the S-5-S and has one setscrew rather than two. The Mini is the choice for attaching all kinds of rooftop accessories: signs, walkways, satellite dishes, antennas, rooftop lighting, lightning protection systems, solar arrays, exhaust stack bracing, conduit, condensate lines, mechanical equipment-just about anything!
All standard and Mini clamps undergo rigorous load testing. Negative load normal-to-seam testing (pull-up) is performed on all Mini clamps, and parallel-to-seam testing (drag load) is performed on all standard clamps.
|PCS / BOX||50|
|1 – 49||$3.59|
|50 – 199||$3.49|
Pricing subject to change at will.
- Use on vertical snap-together profiles
- Use on single-folded with horizontal projection (horizontal seams) under ≤ 0.54” (13 mm)
- Utility mounting and other light and medium-duty applications
- Smaller than the standard S-5-S
- One T-30 Torx round-point setscrew (Torx bit tip provided)
- No M8 bolt included
- Also available in stainless - call for pricing
|Dimensions||2.25 × 2.25 × 2.25 in|
S-5 Clamp WITHOUT Bolt, M8 1.25 X 16mm (+$0.28), M8 1.25 X 20mm (+$0.35), M8 1.25 X 40mm (+$0.45)